remove paper repo name value

Closes #11

.github/CODEOWNERS

@@ -0,0 +1 @@
+*   @Jack1424

.github/ISSUE_TEMPLATE/BUG-REPORT.yml

@@ -0,0 +1,71 @@
+name: Bug report
+description: Report problems/issues here
+labels: [bug]
+body:
+- type: checkboxes
+  attributes:
+    label: Have you searched the wiki and looked for existing issues for this?
+    description: Check the wiki first in case this is a common issue. If it isn't make sure that [no one else has reported it](https://github.com/Jack1424/RealTimeWeather/issues?q=is%3Aissue+label%3Abug+).
+    options:
+    -  label: This is not a common issue or cannot be fixed by the solutions provided
+       required: true
+    -  label: This issue has not been reported yet
+       required: true
+
+- type: textarea
+  attributes:
+    label: What's happening
+    description: Describe the issue that you're having. Make sure to be clear and concise.
+  validations:
+    required: true
+
+- type: textarea
+  attributes:
+    label: What's supposed to happen
+    description: Describe what should be happening
+  validations:
+    required: true
+
+- type: dropdown
+  attributes:
+    label: Server Software
+    description: What type of server are you running RealTimeWeather on?
+    options:
+      - Bukkit
+      - Paper
+      - Spigot
+      - Purpur
+      - Other
+  validations:
+    required: true
+
+- type: input
+  attributes:
+    label: Minecraft version
+    description: What version of Minecraft is your server running?
+    placeholder: 'Example: 1.19.3'
+  validations:
+    required: true
+
+- type: input
+  attributes:
+    label: Server log
+    description: If applicable, paste the link to your server log here
+    placeholder: Get a link at https://pastebin.com/
+  validations:
+    required: false
+
+- type: input
+  attributes:
+    label: RTW configuration
+    description: If applicable, paste the link to your configuration file here **(REMEMBER TO REMOVE YOUR API KEY)**
+    placeholder: Get a link at https://pastebin.com/
+  validations:
+    required: false
+
+- type: textarea
+  attributes:
+    label: Additional information
+    description: Put any more information (including screenshots and videos) that you might have here
+  validations:
+    required: false

.github/ISSUE_TEMPLATE/FEATURE-REQUEST.yml

@@ -0,0 +1,18 @@
+name: Feature request
+description: Use this to request new features and/or changes
+labels: [enhancement]
+body:
+- type: checkboxes
+  attributes:
+    label: Is there already a request similar to this?
+    description: Check the [other feature requests](https://github.com/Jack1424/RealTimeWeather/issues?q=label%3Aenhancement+) and ensure that this hasn't been requested yet
+    options:
+      - label: There are not and have never been any feature requests similar to this
+        required: true
+
+- type: textarea
+  attributes:
+    label: What's your suggestion?
+    description: Use the space below to describe your suggestion. Feel free to attach any relevant files/links.
+  validations:
+    required: true

.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1 @@
+blank_issues_enabled: false

.gitignore

@@ -1,23 +1,36 @@
-# User-specific IDEA files
+# =====================================
-.idea
+# RealTimeWeather – Git ignore rules
+# =====================================
+
+# Gradle build & cache
+.gradle/
+build/
+
+# Gradle Wrapper – keep only the two required files
+!gradle/wrapper/gradle-wrapper.jar
+!gradle/wrapper/gradle-wrapper.properties
+gradle/wrapper/*
+
+# IDEs
+# IntelliJ IDEA
+.idea/
 *.iml
-
+# VS Code
-# Gradle build files
+.vscode/
-.gradle
+# Eclipse
-**/build/
-!src/**/build/
-
-# Avoid ignoring Gradle wrapper jar file (.jar files are usually ignored)
-!gradle-wrapper.jar
-
-# Avoid ignore Gradle wrappper properties
-!gradle-wrapper.properties
-
-# Cache of project
-.gradletasknamecache
-
-# Eclipse Gradle plugin generated files
-# Eclipse Core
 .project
-# JDT-specific (Eclipse Java Development Tools)
+.classpath
-.classpath
+.settings/
+
+# Generated output folders
+out/
+bin/
+
+# MacOS
+.DS_Store
+
+# Temp files
+*~
+*.swp
+*.tmp
+*.bak

.travis.yml

@@ -1,2 +1,2 @@
 language: java
-jdk: openjdk17
+jdk: openjdk21

LICENSE.md

@@ -0,0 +1,674 @@
+                    GNU GENERAL PUBLIC LICENSE
+                       Version 3, 29 June 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU General Public License is a free, copyleft license for
+software and other kinds of works.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+the GNU General Public License is intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.  We, the Free Software Foundation, use the
+GNU General Public License for most of our software; it applies also to
+any other work released this way by its authors.  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  To protect your rights, we need to prevent others from denying you
+these rights or asking you to surrender the rights.  Therefore, you have
+certain responsibilities if you distribute copies of the software, or if
+you modify it: responsibilities to respect the freedom of others.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must pass on to the recipients the same
+freedoms that you received.  You must make sure that they, too, receive
+or can get the source code.  And you must show them these terms so they
+know their rights.
+
+  Developers that use the GNU GPL protect your rights with two steps:
+(1) assert copyright on the software, and (2) offer you this License
+giving you legal permission to copy, distribute and/or modify it.
+
+  For the developers' and authors' protection, the GPL clearly explains
+that there is no warranty for this free software.  For both users' and
+authors' sake, the GPL requires that modified versions be marked as
+changed, so that their problems will not be attributed erroneously to
+authors of previous versions.
+
+  Some devices are designed to deny users access to install or run
+modified versions of the software inside them, although the manufacturer
+can do so.  This is fundamentally incompatible with the aim of
+protecting users' freedom to change the software.  The systematic
+pattern of such abuse occurs in the area of products for individuals to
+use, which is precisely where it is most unacceptable.  Therefore, we
+have designed this version of the GPL to prohibit the practice for those
+products.  If such problems arise substantially in other domains, we
+stand ready to extend this provision to those domains in future versions
+of the GPL, as needed to protect the freedom of users.
+
+  Finally, every program is threatened constantly by software patents.
+States should not allow patents to restrict development and use of
+software on general-purpose computers, but in those that do, we wish to
+avoid the special danger that patents applied to a free program could
+make it effectively proprietary.  To prevent this, the GPL assures that
+patents cannot be used to render the program non-free.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Use with the GNU Affero General Public License.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU Affero General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the special requirements of the GNU Affero General Public License,
+section 13, concerning interaction through a network will apply to the
+combination as such.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If the program does terminal interaction, make it output a short
+notice like this when it starts in an interactive mode:
+
+    <program>  Copyright (C) <year>  <name of author>
+    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, your program's commands
+might be different; for a GUI interface, you would use an "about box".
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU GPL, see
+<https://www.gnu.org/licenses/>.
+
+  The GNU General Public License does not permit incorporating your program
+into proprietary programs.  If your program is a subroutine library, you
+may consider it more useful to permit linking proprietary applications with
+the library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.  But first, please read
+<https://www.gnu.org/licenses/why-not-lgpl.html>.

README.md

@@ -1,2 +1,27 @@
-# RealTimeWeather [![Build Status](https://app.travis-ci.com/Jack1424/RealTimeWeather.svg?branch=master)](https://app.travis-ci.com/Jack1424/RealTimeWeather)
+![4SplitSingleLineCloseColors](https://raw.githubusercontent.com/Jack1424/RealTimeWeather/master/media/4SplitColors.png)
-A lightweight Minecraft Java server plugin that allows you to sync your server's time and weather with the real world
+[![Build Status](https://app.travis-ci.com/Jack1424/RealTimeWeather.svg?branch=master)](https://app.travis-ci.com/Jack1424/RealTimeWeather)
+
+### A lightweight Minecraft server plugin that allows you to sync your server's time and weather with the real world
+___
+**Current Features:**
+- Lightweight
+- Easy setup
+- Supports all Minecraft versions from 1.7+
+- Constant time syncing (including custom or real-world sunrise/sunset times)
+- Weather syncing (rain/snow and thunder)
+- Enable/disable specific worlds
+
+**Upcoming Features:**
+- [ ] Commands
+- [ ] Multi-world support
+- [ ] Folia support
+
+## Installation
+Just download the [latest version](https://github.com/Jack1424/RealTimeWeather/releases/latest) of RTW and put it in your `plugins` directory. 
+You'll need to run your server at least once to generate the configuration file.
+After running (and then stopping) your server, simply change the values in the configuration file to what you'd like, and you're good to go.
+
+## Contributions/Support
+I'm open to any help/ideas that you have. Just open an issue or a pull request, and I'll be sure to look at it as soon as I can. Builds with `gradlew shadowJar`.
+
+License: GPL-3.0

build.gradle

@@ -1,46 +1,48 @@
+import io.papermc.paperweight.userdev.ReobfArtifactConfiguration
+
 plugins {
     id 'java'
+    id 'io.papermc.paperweight.userdev' version '2.0.0-beta.17'
+    id 'com.gradleup.shadow' version '8.3.6'
 }
 
-group = 'io.github.Jack1424'
+group = 'io.github.jack1424'
-version = '1.0.0'
+version = '2.0.0-DEV'
 
 repositories {
     mavenCentral()
     maven {
-        name = 'papermc-repo'
         url = 'https://repo.papermc.io/repository/maven-public/'
     }
-    maven {
-        name = 'sonatype'
-        url = 'https://oss.sonatype.org/content/groups/public/'
-    }
 }
 
 dependencies {
-    compileOnly 'io.papermc.paper:paper-api:1.19.2-R0.1-SNAPSHOT'
+    paperweight.paperDevBundle('1.21.5-R0.1-SNAPSHOT')
+    implementation 'org.bstats:bstats-bukkit:3.1.0'
+}
+
+shadowJar {
+    archiveClassifier.set('')
+    relocate('org.bstats', 'io.github.jack1424.realtimeweather.libs.bstats')
+    minimize()
+}
+
+tasks.jar {
+    paperweight.reobfArtifactConfiguration = ReobfArtifactConfiguration.getMOJANG_PRODUCTION()
+}
+
+tasks.shadowJar {
+    paperweight.reobfArtifactConfiguration = ReobfArtifactConfiguration.getMOJANG_PRODUCTION()
 }
 
-def targetJavaVersion = 17
 java {
-    def javaVersion = JavaVersion.toVersion(targetJavaVersion)
+    toolchain.languageVersion.set(JavaLanguageVersion.of(21))
-    sourceCompatibility = javaVersion
-    targetCompatibility = javaVersion
-    if (JavaVersion.current() < javaVersion) {
-        toolchain.languageVersion = JavaLanguageVersion.of(targetJavaVersion)
-    }
-}
-
-tasks.withType(JavaCompile).configureEach {
-    if (targetJavaVersion >= 10 || JavaVersion.current().isJava10Compatible()) {
-        options.release = targetJavaVersion
-    }
 }
 
 processResources {
     def props = [version: version]
     inputs.properties props
-    filteringCharset 'UTF-8'
+    filteringCharset = 'UTF-8'
     filesMatching('plugin.yml') {
         expand props
     }

gradle/wrapper/gradle-wrapper.properties

@@ -1,5 +1,7 @@
 distributionBase=GRADLE_USER_HOME
 distributionPath=wrapper/dists
-distributionUrl=https\://services.gradle.org/distributions/gradle-7.3.3-bin.zip
+distributionUrl=https\://services.gradle.org/distributions/gradle-8.14.1-bin.zip
+networkTimeout=10000
+validateDistributionUrl=true
 zipStoreBase=GRADLE_USER_HOME
 zipStorePath=wrapper/dists

gradlew

@@ -1,7 +1,7 @@
 #!/bin/sh
 
 #
-# Copyright <EFBFBD> 2015-2021 the original authors.
+# Copyright © 2015-2021 the original authors.
 #
 # Licensed under the Apache License, Version 2.0 (the "License");
 # you may not use this file except in compliance with the License.
@@ -32,10 +32,10 @@
 #       Busybox and similar reduced shells will NOT work, because this script
 #       requires all of these POSIX shell features:
 #         * functions;
-#         * expansions <EFBFBD>$var<EFBFBD>, <EFBFBD>${var}<EFBFBD>, <EFBFBD>${var:-default}<EFBFBD>, <EFBFBD>${var+SET}<EFBFBD>,
+#         * expansions «$var», «${var}», «${var:-default}», «${var+SET}»,
-#           <EFBFBD>${var#prefix}<EFBFBD>, <EFBFBD>${var%suffix}<EFBFBD>, and <EFBFBD>$( cmd )<EFBFBD>;
+#           «${var#prefix}», «${var%suffix}», and «$( cmd )»;
-#         * compound commands having a testable exit status, especially <EFBFBD>case<EFBFBD>;
+#         * compound commands having a testable exit status, especially «case»;
-#         * various built-in commands including <EFBFBD>command<EFBFBD>, <EFBFBD>set<EFBFBD>, and <EFBFBD>ulimit<EFBFBD>.
+#         * various built-in commands including «command», «set», and «ulimit».
 #
 #   Important for patching:
 #
@@ -55,7 +55,7 @@
 #       Darwin, MinGW, and NonStop.
 #
 #   (3) This script is generated from the Groovy template
-#       https://github.com/gradle/gradle/blob/master/subprojects/plugins/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt
+#       https://github.com/gradle/gradle/blob/HEAD/platforms/jvm/plugins-application/src/main/resources/org/gradle/api/internal/plugins/unixStartScript.txt
 #       within the Gradle project.
 #
 #       You can find Gradle at https://github.com/gradle/gradle/.
@@ -80,13 +80,11 @@ do
     esac
 done
 
-APP_HOME=$( cd "${APP_HOME:-./}" && pwd -P ) || exit
+# This is normally unused
-
+# shellcheck disable=SC2034
-APP_NAME="Gradle"
 APP_BASE_NAME=${0##*/}
-
+# Discard cd standard output in case $CDPATH is set (https://github.com/gradle/gradle/issues/25036)
-# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
+APP_HOME=$( cd "${APP_HOME:-./}" > /dev/null && pwd -P ) || exit
-DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"'
 
 # Use the maximum available, or set MAX_FD != -1 to use that value.
 MAX_FD=maximum
@@ -133,22 +131,29 @@ location of your Java installation."
     fi
 else
     JAVACMD=java
-    which java >/dev/null 2>&1 || die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+    if ! command -v java >/dev/null 2>&1
+    then
+        die "ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
 
 Please set the JAVA_HOME variable in your environment to match the
 location of your Java installation."
+    fi
 fi
 
 # Increase the maximum file descriptors if we can.
 if ! "$cygwin" && ! "$darwin" && ! "$nonstop" ; then
     case $MAX_FD in #(
       max*)
+        # In POSIX sh, ulimit -H is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
         MAX_FD=$( ulimit -H -n ) ||
             warn "Could not query maximum file descriptor limit"
     esac
     case $MAX_FD in  #(
       '' | soft) :;; #(
       *)
+        # In POSIX sh, ulimit -n is undefined. That's why the result is checked to see if it worked.
+        # shellcheck disable=SC2039,SC3045
         ulimit -n "$MAX_FD" ||
             warn "Could not set maximum file descriptor limit to $MAX_FD"
     esac
@@ -193,11 +198,15 @@ if "$cygwin" || "$msys" ; then
     done
 fi
 
-# Collect all arguments for the java command;
+
-#   * $DEFAULT_JVM_OPTS, $JAVA_OPTS, and $GRADLE_OPTS can contain fragments of
+# Add default JVM options here. You can also use JAVA_OPTS and GRADLE_OPTS to pass JVM options to this script.
-#     shell script including quotes and variable substitutions, so put them in
+DEFAULT_JVM_OPTS='"-Xmx64m" "-Xms64m"'
-#     double quotes to make sure that they get re-expanded; and
+
-#   * put everything else in single quotes, so that it's not re-expanded.
+# Collect all arguments for the java command:
+#   * DEFAULT_JVM_OPTS, JAVA_OPTS, JAVA_OPTS, and optsEnvironmentVar are not allowed to contain shell fragments,
+#     and any embedded shellness will be escaped.
+#   * For example: A user cannot expect ${Hostname} to be expanded, as it is an environment variable and will be
+#     treated as '${Hostname}' itself on the command line.
 
 set -- \
         "-Dorg.gradle.appname=$APP_BASE_NAME" \
@@ -205,6 +214,12 @@ set -- \
         org.gradle.wrapper.GradleWrapperMain \
         "$@"
 
+# Stop when "xargs" is not available.
+if ! command -v xargs >/dev/null 2>&1
+then
+    die "xargs is not available"
+fi
+
 # Use "xargs" to parse quoted args.
 #
 # With -n1 it outputs one arg per line, with the quotes and backslashes removed.

gradlew.bat

@@ -14,7 +14,7 @@
 @rem limitations under the License.
 @rem
 
-@if "%DEBUG%" == "" @echo off
+@if "%DEBUG%"=="" @echo off
 @rem ##########################################################################
 @rem
 @rem  Gradle startup script for Windows
@@ -25,7 +25,8 @@
 if "%OS%"=="Windows_NT" setlocal
 
 set DIRNAME=%~dp0
-if "%DIRNAME%" == "" set DIRNAME=.
+if "%DIRNAME%"=="" set DIRNAME=.
+@rem This is normally unused
 set APP_BASE_NAME=%~n0
 set APP_HOME=%DIRNAME%
 
@@ -40,13 +41,13 @@ if defined JAVA_HOME goto findJavaFromJavaHome
 
 set JAVA_EXE=java.exe
 %JAVA_EXE% -version >NUL 2>&1
-if "%ERRORLEVEL%" == "0" goto execute
+if %ERRORLEVEL% equ 0 goto execute
 
-echo.
+echo. 1>&2
-echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH.
+echo ERROR: JAVA_HOME is not set and no 'java' command could be found in your PATH. 1>&2
-echo.
+echo. 1>&2
-echo Please set the JAVA_HOME variable in your environment to match the
+echo Please set the JAVA_HOME variable in your environment to match the 1>&2
-echo location of your Java installation.
+echo location of your Java installation. 1>&2
 
 goto fail
 
@@ -56,11 +57,11 @@ set JAVA_EXE=%JAVA_HOME%/bin/java.exe
 
 if exist "%JAVA_EXE%" goto execute
 
-echo.
+echo. 1>&2
-echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME%
+echo ERROR: JAVA_HOME is set to an invalid directory: %JAVA_HOME% 1>&2
-echo.
+echo. 1>&2
-echo Please set the JAVA_HOME variable in your environment to match the
+echo Please set the JAVA_HOME variable in your environment to match the 1>&2
-echo location of your Java installation.
+echo location of your Java installation. 1>&2
 
 goto fail
 
@@ -75,13 +76,15 @@ set CLASSPATH=%APP_HOME%\gradle\wrapper\gradle-wrapper.jar
 
 :end
 @rem End local scope for the variables with windows NT shell
-if "%ERRORLEVEL%"=="0" goto mainEnd
+if %ERRORLEVEL% equ 0 goto mainEnd
 
 :fail
 rem Set variable GRADLE_EXIT_CONSOLE if you need the _script_ return code instead of
 rem the _cmd.exe /c_ return code!
-if  not "" == "%GRADLE_EXIT_CONSOLE%" exit 1
+set EXIT_CODE=%ERRORLEVEL%
-exit /b 1
+if %EXIT_CODE% equ 0 set EXIT_CODE=1
+if not ""=="%GRADLE_EXIT_CONSOLE%" exit %EXIT_CODE%
+exit /b %EXIT_CODE%
 
 :mainEnd
 if "%OS%"=="Windows_NT" endlocal

src/main/java/io/github/jack1424/realtimeweather/RealTimeWeather.java

@@ -1,200 +1,30 @@
 package io.github.jack1424.realtimeweather;
 
-import org.bukkit.GameRule;
+import org.bstats.bukkit.Metrics;
-import org.bukkit.World;
-import org.bukkit.event.EventHandler;
-import org.bukkit.event.EventPriority;
-import org.bukkit.event.Listener;
-import org.bukkit.event.player.PlayerCommandPreprocessEvent;
-import org.bukkit.event.server.ServerCommandEvent;
 import org.bukkit.plugin.java.JavaPlugin;
-import org.json.simple.JSONArray;
-import org.json.simple.JSONObject;
-import org.json.simple.parser.JSONParser;
-import org.json.simple.parser.ParseException;
 
-import javax.net.ssl.HttpsURLConnection;
-import java.io.IOException;
-import java.net.URL;
-import java.time.ZoneId;
-import java.time.zone.ZoneRulesException;
-import java.util.*;
 import java.util.logging.Logger;
 
-public final class RealTimeWeather extends JavaPlugin implements Listener {
+public final class RealTimeWeather extends JavaPlugin {
-	private Logger logger;
+	private final Logger logger = getLogger();
-	private ZoneId timezone;
-	private boolean timeEnabled, weatherEnabled, debug;
 
 	@Override
 	public void onEnable() {
-		logger = getLogger();
 		logger.info("Starting...");
 
-		saveDefaultConfig();
+		// TODO: Revamp metrics?
-
+		Metrics metrics = new Metrics(this, 16709);
-		debug = getConfig().getBoolean("Debug");
+		/*
-
+		metrics.addCustomChart(new SimplePie("weather_sync_enabled", () -> String.valueOf(config.isWeatherEnabled())));
-		timeEnabled = getConfig().getBoolean("SyncTime");
+		metrics.addCustomChart(new SimplePie("sunrise_sunset_source", () -> String.valueOf(config.getSunriseSunset())));
-		if (timeEnabled)
+		metrics.addCustomChart(new SimplePie("time_sync_enabled", () -> String.valueOf(config.isTimeEnabled())));
-			setupTime();
+		*/
-
-		weatherEnabled = getConfig().getBoolean("SyncWeather");
-		if (weatherEnabled)
-			setupWeather();
-
-		getServer().getPluginManager().registerEvents(this, this);
 
 		logger.info("Started!");
 	}
 
 	@Override
 	public void onDisable() {
-		for (World world : getServer().getWorlds())
-			if (world.getEnvironment().equals(World.Environment.NORMAL)) {
-				debug("Re-enabling normal daylight and weather cycles...");
-
-				world.setGameRule(GameRule.DO_DAYLIGHT_CYCLE, true);
-				world.setGameRule(GameRule.DO_WEATHER_CYCLE, true);
-			}
-
 		logger.info("Stopping...");
 	}
-
-	@EventHandler(priority = EventPriority.HIGH, ignoreCancelled = true)
-	public void onOperatorSet(PlayerCommandPreprocessEvent event) {
-		if ((timeEnabled && event.getMessage().contains("time set")) || (weatherEnabled && event.getMessage().contains("weather"))) {
-			event.setCancelled(true);
-			event.getPlayer().sendMessage("Command cancelled (RealTimeWeather is controlling this)");
-		}
-	}
-
-	@EventHandler(priority = EventPriority.HIGH, ignoreCancelled = true)
-	public void onOperatorSetConsole(ServerCommandEvent event) {
-		if ((timeEnabled && event.getCommand().contains("time set")) || (weatherEnabled && event.getCommand().contains("weather"))) {
-			event.setCancelled(true);
-			event.getSender().sendMessage("Command cancelled (RealTimeWeather is controlling this)");
-		}
-	}
-
-	private void setupTime() {
-		try {
-			timezone = ZoneId.of(Objects.requireNonNull(getConfig().getString("Timezone")));
-		} catch (NullPointerException|ZoneRulesException e) {
-			logger.severe("Error loading timezone. Check that the values in your configuration file are valid.");
-			debug(e.getMessage());
-			logger.severe("Disabling time sync...");
-
-			timeEnabled = false;
-			return;
-		}
-
-		debug("Enabling time zone sync (every second)");
-		debug("Syncing time with " + timezone.toString());
-
-		for (World world : getServer().getWorlds())
-			if (world.getEnvironment().equals(World.Environment.NORMAL))
-				world.setGameRule(GameRule.DO_DAYLIGHT_CYCLE, false);
-
-		getServer().getScheduler().scheduleSyncRepeatingTask(this, () -> {
-			if (timeEnabled) {
-				Calendar cal = Calendar.getInstance(TimeZone.getTimeZone(timezone));
-				for (World world : getServer().getWorlds())
-					if (world.getEnvironment().equals(World.Environment.NORMAL))
-						world.setTime((1000 * cal.get(Calendar.HOUR_OF_DAY)) + (16 * cal.get(Calendar.MINUTE)) - 6000); // TODO: Time is one minute behind
-			}
-		}, 0L, 20L); // TODO: Does this really need to update every second?
-	}
-
-	private void setupWeather() {
-		String apiKey = getConfig().getString("APIKey");
-		String zipCode = getConfig().getString("ZipCode");
-		String countryCode = getConfig().getString("CountryCode");
-
-		String lat, lon;
-		try {
-			HttpsURLConnection con = (HttpsURLConnection) new URL(String.format("https://api.openweathermap.org/geo/1.0/zip?zip=%s,%s&appid=%s", zipCode, countryCode, apiKey)).openConnection();
-			con.setRequestMethod("GET");
-			con.connect();
-
-			int response = con.getResponseCode();
-			if (response > 499) {
-				logger.severe("There was a server error when requesting weather information. Please try again later");
-				throw new Exception("Server error");
-			}
-			else if (response > 399) {
-				String message = "Error when getting weather information: ";
-				switch (response) {
-					case 401 -> logger.severe(message + "API key incorrect");
-					case 404 -> logger.severe(message + "Zip/Country code incorrect");
-					default -> logger.severe("Unknown error");
-				}
-				logger.severe("Please check that the values set in the config file are correct");
-
-				throw new Exception("Configuration error");
-			}
-
-			JSONObject obj = makeWeatherRequest(con.getURL());
-			lat = String.valueOf(obj.get("lat"));
-			lon = String.valueOf(obj.get("lon"));
-		} catch (Exception e) {
-			debug(e.getMessage());
-			logger.severe("Disabling weather sync...");
-
-			weatherEnabled = false;
-			return;
-		}
-
-		getServer().getScheduler().scheduleSyncRepeatingTask(this, () -> {
-			debug("Syncing weather...");
-
-			boolean rain = false, thunder = false;
-			try {
-				JSONObject obj = makeWeatherRequest(new URL(String.format("https://api.openweathermap.org/data/2.5/weather?lat=%s&lon=%s&appid=%s", lat, lon, apiKey)));
-				JSONArray conditions = (JSONArray) obj.get("weather");
-
-				for (Object rawCondition : conditions) {
-					JSONObject condition = (JSONObject) rawCondition;
-					int id = Integer.parseInt(String.valueOf(condition.get("id")));
-					debug("Weather ID: " + id);
-
-					while (id >= 10)
-						id /= 10;
-
-					if (!rain)
-						rain = id == 2 || id == 3 || id == 5 || id == 6;
-					if (!thunder)
-						thunder = id == 2;
-				}
-			} catch (Exception e) {
-				logger.severe("There was an error when attempting to get weather information");
-				debug(e.getMessage());
-			}
-
-			debug("Setting weather (Rain: " + rain + ", Thunder: " + thunder + ")...");
-			for (World world : getServer().getWorlds())
-				if (world.getEnvironment().equals(World.Environment.NORMAL)) {
-					world.setStorm(rain);
-					world.setThundering(thunder);
-				}
-		}, 0L, 6000L);
-	}
-
-	private JSONObject makeWeatherRequest(URL url) throws IOException, ParseException {
-		Scanner scanner = new Scanner(url.openStream());
-		StringBuilder data = new StringBuilder();
-		while (scanner.hasNext()) {
-			data.append(scanner.nextLine());
-		}
-		scanner.close();
-
-		JSONParser parser = new JSONParser();
-		return (JSONObject) parser.parse(data.toString());
-	}
-
-	private void debug(String message) {
-		if (debug) {
-			logger.info("[DEBUG] " + message);
-		}
-	}
 }

src/main/resources/config.yml

@@ -1,36 +1,110 @@
-# RealTimeWeather Configuration File (v1)
+# RealTimeWeather Configuration File (v2.0.0)
-# Configure RTM below BEFORE using it
+# You can find detailed instructions at: https://github.com/Jack1424/RealTimeWeather/wiki#editing-the-configuration-file
+
+######################################## Real Time Weather Settings ##################################################
+# By default, RealTimeWeather will check if an update is available every 24 hours (1734000 ticks)                    #
+# You can change the interval here (or set to 0 to disable update checks)                                            #
+# If this is disabled, RealTimeWeather will still check for updates on startup                                       #
+# You can find a handy tick calculator here: https://mapmaking.fr/tick/                                              #
+UpdateCheckInterval: 1734000
+#
+# Set to true for various console messages when time and weather sync are executed                                   #
+# This is useful if the plugin is not working, and you want to find out what's wrong                                 #
+# This will also provide error messages even when an error is caught and managed by RTM                              #
+# Note: There will be no messages during a time sync because they happen very frequently                             #
+# Note: Unhandled plugin errors will still be logged regardless of the debug value                                   #
+Debug: false
+######################################################################################################################
 
 ################################# TIME SYNC SETTINGS #################################################################
 # Set to true to enable time syncing, or false to disable                                                            #
+# All time-related settings will be ignored if this is set to false                                                  #
 SyncTime: false
 #                                                                                                                    #
-# Enter the time zone that you want to sync your world(s) with                                                       #
+# By default, RealTimeWeather will apply the time sync settings below to all worlds                                  #
-# This value CAN be different from your chosen weather location                                                      #
+# End and nether worlds will not be synced                                                                           #
-# Acceptable formats include: EST, America/Los_Angeles, and GMT-8:00                                                 #
+# If you ony want to enable time syncing in some worlds on your server, set this to false                            #
-# You can find a full list of timezones here: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List      #
+TimeSyncAllWorlds: true
-Timezone: 'America/New_York'
 #                                                                                                                    #
+# List the worlds that you want RealTimeWeather to sync the time in                                                  #
+# End and nether worlds will not be synced                                                                           #
+# This only works if TimeSyncAllWorlds is set to false                                                               #
+TimeSyncWorlds:
+  - world
+#                                                                                                                    #
+# Set to false to enable the /time set command (not recommended)                                                     #
+BlockTimeSetCommand: true
+#                                                                                                                    #
+# Prevent players from sleeping in beds at night (they will still be able to set their spawn point)                  #
+# If you disable this, strange things could happen                                                                   #
+DisableBedsAtNight: true
+# The message sent to players when they try to sleep at night when beds are disabled                                 #
+DisableBedsAtNightMessage: ''
+#                                                                                                                    #
+# You can change the time between time syncs from the default (5 seconds) below                                      #
+TimeSyncInterval: 100
+#                                                                                                                    #
+# Enter the time zone that you want to sync your world(s) with                                                       #
+# This location CAN be different from your chosen weather location                                                   #
+# You can find a full list of timezones here: https://en.wikipedia.org/wiki/List_of_tz_database_time_zones#List      #
+Timezone: 'Etc/UTC'
+#                                                                                                                    #
+# Set to default to use "default" Minecraft sunrise/sunset times (always 5:02 AM and 6:36 PM respectfully)           #
+# Set to real to sync the sunrise/sunset times with a real world location (configure below)                          #
+# Set to custom to use custom sunrise/sunset times (configure below)                                                 #
+SunriseSunset: default
+# Enter the latitude and longitude of the location that you want to sync the sunrise and sunset with                 #
+# If you set this to a place with no sunrise/sunset (like the North Pole), the default times will be used            #
+# NOTE: You can find the latitude and longitude of a location at https://www.latlong.net/                            #
+# This feature is provided for free by SunriseSunset.io                                                              #
+SunriseSunsetLatitude: '0'
+SunriseSunsetLongitude: '0'
+# Enter the times that you would like to use for sunrise and sunset                                                  #
+# You MUST include the seconds (even if they're just 00)                                                             #
+# Sunrise is defined as 23041 ticks and sunset is 12610 ticks in-game                                                #
+SunriseCustomTime: '5:02:27 AM'
+SunsetCustomTime: '6:36:36 PM'
 ######################################################################################################################
 
 ################################# WEATHER SYNC SETTINGS ##############################################################
 # Set to true to enable weather syncing, or false to disable                                                         #
+# All weather-related settings will be ignored if this is set to false                                               #
 SyncWeather: false
 #                                                                                                                    #
+# By default, RealTimeWeather will apply the weather sync settings below to all worlds                               #
+# End and nether worlds will not be synced                                                                           #
+# If you ony want to enable weather syncing in some worlds on your server, set this to false                         #
+WeatherSyncAllWorlds: true
+#                                                                                                                    #
+# List the worlds that you want RealTimeWeather to sync the weather in                                               #
+# End and nether worlds will not be synced                                                                           #
+# This only works if WeatherSyncAllWorlds is set to false                                                            #
+WeatherSyncWorlds:
+  - world
+#                                                                                                                    #
+# Set to false to enable the /weather command (not recommended)                                                      #
+BlockWeatherCommand: true
+#                                                                                                                    #
+# Prevent players from sleeping in beds during a thunderstorm (they will still be able to set their spawn point)     #
+# If you disable this, it could break weather syncing                                                                #
+DisableBedsDuringThunder: true
+# The message sent to players when they try to sleep during a thunderstorm when beds are disabled                    #
+DisableBedsDuringThunderMessage: ''
+#                                                                                                                    #
+# You can change the time between weather syncs from the default (5 minutes) below                                   #
+# Setting this value below 200 (10 seconds) is not recommended                                                       #
+# The minimum safe value on a free API plan is 40 (2 seconds)                                                        #
+# You can find a handy tick calculator here: https://mapmaking.fr/tick/                                              #
+WeatherSyncInterval: 6000
+#                                                                                                                    #
 # In order to access the weather sync feature, create an account at https://openweathermap.org/                      #
 # Then, create an API key at https://openweathermap.org/appid and copy it                                            #
 # Finally, paste the API key below and DO NOT SHARE IT WITH OTHERS                                                   #
 APIKey: 'API_KEY'
-# Enter the zip code and country code of the location that you want to sync your world(s) weather with               #
-# NOTE: A list of country codes can be found at https://en.wikipedia.org/wiki/ISO_3166-1#Current_codes               #
-ZipCode: '10001'
-CountryCode: 'US'
 #                                                                                                                    #
-######################################################################################################################
+# Enter the latitude and longitude of the location that you want to sync your world(s) weather with                  #
-
+# NOTE: You can find the latitude and longitude of a location at https://www.latlong.net/                            #
-# Set to true for various console messages when time and weather sync are executed
+WeatherLatitude: '0'
-# This is useful if the plugin is not working, and you want to find out what's wrong
+WeatherLongitude: '0'
-# This will also provide java error messages when an error is caught and managed by RTM
+#                                                                                                                    #
-# Note: There will be no messages during a time sync because they happen every second
+######################################################################################################################
-# Note: Java exceptions and fatal plugin errors will still be logged regardless of the debug value
-Debug: false

src/main/resources/plugin.yml

@@ -1,7 +1,9 @@
 name: RealTimeWeather
 version: '${version}'
-description: Sync your server time and weather with the real world
 main: io.github.jack1424.realtimeweather.RealTimeWeather
-api-version: 1.19
+description: Sync your Minecraft server's time and weather with the real world
-authors: [ Jack1424 ]
+author: Jack1424
+load: POSTWORLD
 website: https://github.com/Jack1424/RealTimeWeather
+api-version: '1.21.5'
+folia-supported: true